DSP-2600 W


DSP-2600 W


DSP-2600 W is an all-in-one wireless digital processor with 2 inputs and 6 outputs. The unit uses a high precision 32 bit floating point and 96Khz sampling rate that greatly reduces distortion. You can control the processor via Wi-Fi, USB or LAN with the possibility of linking up to 250 devices. DSP-2600 W ships with XLR input and output connectors.


System performance
Input: 2 ways electronic balanced
Impedance: >10KOhm
CMRR: >65dB, 50Hz-10Khz
Output: 6 ways electronic balanced
Output impedance: <60-ohm
Minimum loading impedance: 600-ohm
Maximum output level: +20dBm (600 ohms loading)
Frequency response: +/- 0.5dB 20Hz - 20Khz
Dynamic range: >110dB 20Hz - 20Khz
Distortion: <0.02% @ 1kHz, +18dBm
Maximum delay: 650 mS (adjustable step distance is 2.6uS)
Output gain: Setting range: -40dB to +6dB,Step pitch: ±0.1dB
Input Gain: Setting range: -40dB to +15dB,Step pitch: ±0.1dB

Parameter Equalizer
Filter: 6-bands/each output, 8-bands/each input
Filter gain: +15dB to -30dB, the step distance is 0.1dB
Transition frequency (low pass): 20Hz - 20kHz, 1/36 octave. (368 positions)
Filter: Q value/band width 0.4 to 28.8 / 3 to 0.05
Selectable low frequency / high frequency: 20Hz - 1kHz / 1kHz - 20kHz
Gain: ±15dB, adjustable step distance is 0.1dB
Central frequency: 20Hz - 20kHz, adjustable step dist.: 1/36 octave (368 pos.)

High and low pass filter
Filter: Each output with one filter
Transition frequency (high pass): 10Hz – 16kHz, adjustable step distance is 1/36 octave
Transition frequency (low pass): 60Hz – 22kHz, adjustable step distance is 1/36 octave
Selectable filter type: Linkwitz-Riley, Bessel, Butterworth

Threshold range: +20dBu to -10dBu
Start-up time: 0.3 to 90ms
Release time: Start-up time 4, 8, 16 or 32 times